Bootable hard drive diagnostic tool (Top 10 Tools)

We research and review everything that we share and recommend on our blog and try to keep things up to date. When you buy something through our links we may earn a commission. Learn more about our affiliate disclosure and about us.

Here is all about the Bootable hard drive diagnostic tool: If you think there might be a hard drive issue, there are various free hard drive testing apps that can assist you in figuring out what, if anything is wrong. Your Windows-based operating system already includes tools like Windows Error Checking and the chkdsk command. Still, other ones, like those listed below, are also available from hard drive manufacturers and other developers.

Bootable hard drive diagnostic tool:

  • Hiren’s BootCD – features a variety of tools.
  • Trinity Rescue Kit, a text-based program with a Linux command line and a primary focus on Windows.
  • The Ultimate BootCD is text-based and has over 100 repair, restore, and diagnostic utilities.
  • SystemRescueCD – Basic repair/recovery tools in a Linux environment with text and graphics.
Bootable hard drive diagnostic tool 1

Ubuntu Rescue Remix offers a variety of open source data recovery, repair, and forensic tools and is nearly entirely based on the Linux command line.

Best bootable hard drive diagnostic tool:

Macrorit Disk Scanner:

A straightforward application that scans a hard drive for faulty sectors is called Macrorit Disk Scanner. Since it is completely portable and doesn’t require installation, it is simple to use, and you can start using it immediately.

Macrorit Disk Scanner

Most of this page is utilized to show the scan’s progress visually and makes it very evident if there is damage. Windows 11, 10, 8, 7, Vista, and XP are on the official list of operating systems that may run this program.

Free EASIS Drive Check:

Free EASIS Drive Check is a hard drive tester that includes a sector test and a SMART value reader as its two major testing functions. The sector test examines the media’s surface for reading mistakes, while the SMART test provides more than 40 values about a hard drive.

Free EASIS Drive Check

When either test is finished, the report can be read directly from the application, set to be emailed to you, or printed. Windows 2000 through Windows 7 are stated to be compatible with Free EASIS Drive Check; however, we also successfully tested it in Windows 10 and 8.

HD Tune:

With HD Tune, a Windows-based hard driver testing program, you can use any internal or external hard drive, SSD, or memory card. You may do a benchmark read test, a self-monitoring analysis and reporting technology health check, and an error scan with HD Tune. Only Windows 7, Vista, XP, and 2000 are listed as operating systems that are supported, yet we successfully used HD Tune in Windows 10 and Windows 8 despite these limitations.

Fujitsu Diagnostic Tool:

A free hard drive testing tool made specifically for Fujitsu hard drives is called the Fujitsu Diagnostic Tool. A Windows version and a bootable, DOS-compatible version of the Fujitsu Diagnostic Tool are offered. The bootable version, however, is created for floppy discs; a USB or CD-compatible image is not offered.

Fujitsu Diagnostic Tool offers two tests: a “Quick Test” (which takes around three minutes) and a “Comprehensive Test” (time will vary based on hard drive size). Windows 8, 7, Vista, and XP are all stated to be compatible with the Windows version. Additionally, it may function flawlessly with Windows 11 and Windows 10.

Bart’s Stuff Test:

A free hard drive stress test for Windows is available at Bart’s Stuff Test. This program offers fewer options and is less comprehensive than some of the other tests on this list.

Overall, it is a good addition to your toolkit for hard drive testing, particularly if you’re having trouble testing with an ISO-based tool mentioned above but want something different from the Windows default tool. Only Windows XP through Windows 95 is said to support it. But the most recent version worked flawlessly in the Windows 10 and Windows 8 tests we conducted.

Samsung HUTIL:

A free hard disc diagnostic tool for Samsung hard drives is Samsung HUTIL. ES-Tool is another name for HUTIL. The HUTIL tool from Samsung is offered as an ISO image that may be burned to a CD or USB disc. Due to its operating system independence, HUTIL is a more effective testing tool than Windows-specific ones in general. HUTIL can also be launched from a bootable floppy disc.

Burning Samsung HUTIL to a disc or USB device requires a functional hard drive and operating system because it is a bootable program.

Windows Drive Fitness Test (WinDFT):

Most contemporary drives are compatible with the free hard drive diagnostic program Windows theWindows Drive Fitness Test software can be downloaded using the URL below. However, it cannot be used to scan drives that have Windows installed on them.

Only internal hard drives and USB flash drives may be checked with the Windows Drive Fitness Test. WinDFT may be set up on Windows 11, 10, 8, 7, Vista, and XP.


GSmartControl can perform numerous hard drive diagnostics with detailed results and provide an overall drive health evaluation. The number of power cycles, multi-zone error rate, calibration retry count, and other SMART attribute statistics can be seen and saved.

For three self-tests to identify drive flaws, GSmartControl is used: Conveyance Self-test is a 5-minute test intended to find damages that happened during the transport of a drive. A short Self-test takes about 2 minutes to complete and is used to detect a completely damaged hard drive.


The extended Self-test takes 70 minutes to complete and examines the entire surface of a hard drive to find faults.

You can download this application for Windows as a portable or a standard version with a typical installer. The most recent version is compatible with Windows 11, 10, 8, 7, and Vista. However, you may still obtain an outdated copy for earlier iterations of Windows. It is also offered for Linux and Mac users and incorporated in a few LiveCD/LiveUSB packages.


A free hard drive tester called DiskCheckup should function with most hard discs. Short and extended disc tests and SMART data like reading error rate, spin-up time, seek error rate, and temperature is displayed. When an attribute of detail in the SMART section exceeds the manufacturer’s advised threshold, the detail can be programmed to send an email or display a message.

DiskCheckup does not support and cannot detect hard discs with a SCSI or hardware RAID connection. DiskCheckup should work with Windows Server 2008 and 2003, Windows 11, 10, 8, 7, and Vista.


No matter the brand, HDDScan is a free hard drive testing program for all models of drives. Both a surface test and a SMART test are part of it. The program appears to be routinely updated, is portable, and supports practically all drive interfaces. Since Windows XP is the minimum required operating system according to the official specifications, Windows 11, 10, 8, 7, Vista, and Windows Server 2003 should all be compatible.

To conclude:

Let’s conclude what are the best diagnostic tools for bootable hard drives! A malfunctioning computer might not be able to launch, and even if it does, any virus that starts before your software tools can change how they behave to disguise themselves or produce unexpected outcomes. Tools that start up independently of the installed operating system can only use it as static data, providing an entirely unbiased picture.

You should have no trouble finding all the tools and utilities listed below with your preferred search engine. Always download from the official website rather than a software download site, as the latter frequently adds obnoxious or unwanted software on the side.

People Also Ask

What is the purpose of SeaTools bootable?

A thorough, user-friendly diagnostic tool called SeaTools Bootable will help identify the issue stopping you from rapidly accessing data on your desktop or notebook computer. The physical media on your Seagate, Maxtor, Samsung, or non-Seagate disc drive will be subjected to several tests.

How do I make my SeaTools bootable USB?

Fire up SeaTools from a USB drive.. Download the ISO file for SeaTools for DOS. Open the SeaTools for DOS ISO file using 7-Zip. To your hard drive, extract the SeaTools. ima file. Rename the SeaTools. Use Image Writer for Windows to write the SeaTools . At this point, SeaTools for DOS can be launched by booting from the USB disc.

Does SeaTools work with non Seagate drives?

The physical media on your Seagate, Maxtor, Samsung, or non-Segate disc drive will be subjected to several tests. Hard discs that are internal and external should both be able to use SeaTools for Windows.

Is SeaTools Windows safe?

The SeaTools runs a data-safe test on the chosen hard disc drive or device to check for potential issues. Long testing may be stopped whenever necessary.

Similar Posts