Crystal disk info caution (Follow This)

We research and review everything that we share and recommend on our blog and try to keep things up to date. When you buy something through our links we may earn a commission. Learn more about our affiliate disclosure and about us.

Here is all about Crystal disk info caution. Crystal Disk Info is a reliable program that has an excellent reputation. It only reports on how the disc feels about itself. (There are many alternative tools available that perform the same function.)

crystal disk info caution fix

You won’t likely be able to identify any specific piece of software that caused the change in HDD status because it is most likely coincidental (and it would not be the fault of that software anyway – these problems exist below the level that most software works at)

Crystal disk info caution:

It’s not always an obvious sign that your drive may fail if it displays a Caution or Bad health warning. Many drives with Caution or Bad health warnings have survived for years, whereas drives with Good signs have perished within an hour. A recent backup of your data should always be available, and if you ever receive a warning, you should take it as a cue to make an even more current backup.

Large numbers of these mistakes and a significant rise in these errors over a short period are the primary signs of a drive slowly deteriorating. If you wish to keep using a drive that has these issues, you need to keep a close eye on it every day to ensure the counts in the Raw Values column are not dramatically increasing.

CrystalDiskInfo Showing’ Caution”: Three Things to Check Immediately:

I’ve been in your position. What should you do if you recently opened CrystalDiskInfo and it displayed an amber Caution warning next to one of your hard drives of your pc? Is your hard disc in danger of failing? Do you immediately require a new hard drive? Is it that awful, and am I still allowed to use the drive? I need to correct a common error I’ve seen online before we dig into the significance of each S.M.A.R.T. data point:

CrystalDiskInfo 100:

It’sIt’s improbable that you have 100 reallocated/pending/uncorrectable sectors; instead, CrystalDiskInfo’sCrystalDiskInfo’s column you’re looking at is probably the incorrect one. Only pay attention to the Raw Values column; you don’t want to be looking at the Current or Worst columns.

The number of mistakes your drive detects for that S.M.A.R.T. attribute is listed in the Raw Values column. If you’re not a robot, you can alter this by going to. You can modify this by going to: It can occasionally show by default as a hexadecimal value (letters and digits), which is not very helpful unless you can translate Hex to Decimals in your brain.

To get a decimal output for the Raw Values column, use CrystalDiskInfo’sCrystalDiskInfo’s Function -> Advanced Features -> Raw Values and set it to 10 D.E.C. By doing this, you will receive the actual number for each column as opposed to machine-readable gibberish.

Common CrystalDiskInfo Data Points That Should Give You Caution. Let’s delve into these and learn precisely what each of the 3 typical faults entails, as they are what will cause CrystalDiskInfo to provide a warning about the health of your hard drive.

Current Pending Sector Count in CrystalDiskInfo C5:

CrystalDiskInfo will display a Caution warning if the C5 – Current Pending Sector Count column contains a value larger than 0. Your drive’s unstable sectors are waiting to be remapped (reallocated) to free up space, as indicated by your current pending sector count.

In essence, your hard drive is thinking about remapping a sector to one of the spare sectors because it has problems reading that sector of the drive.

The drive’s ability to later successfully read data from the sector will determine whether or not the pending sector count increases or decreases. If the sector is bad, it will turn into a reallocated sector (ID 05), resulting in a decrease in the pending count but an increase in the reallocated count.

Pending sectors are a red flag that your drive could malfunction or have issues. How quickly this count rises is the major indicator of how probable your drive will fail.

If your count is quite low (let’s say 20), and it stays the same after using the drive, restarting the computer, etc., your drive might be in good shape. To avoid data loss, you should quickly replace the drive if your pending sector count rises.

CrystalDiskInfo 05 – Reallocated Sector(s) Count:

CrystalDiskInfo’s warning mechanism and throw a caution if the 05 – Reallocated Sectors Count line contains a value greater than 0. Reallocated sectors count represents the total number of sectors on your hard drive that have been moved to spare sectors, a spare area of your disc is available if a sector on the main part of the disc is defective.

In essence, the data on one of the sectors of your hard drive has been reallocated to a spare sector (spare space) on the disc due to a reading, writing, or verification error.

If the number of reallocated sectors is exceptionally high or if it rises quickly, Your disc might be close to losing functionality. Many hard drives can endure for years with only a few defective sectors being reallocated, so you might not need to fear whether your drive has 1, 2, or even 20 reassigned sectors.

However, you must pay great attention to this number because the disc is probably on its last legs if it keeps going up over time. If a disc is faulty, reallocated sectors can fluctuate wildly from 1 to 20 to 200 to thousands. Check your drive to determine if this count has changed after each reboot or if you add new data to it.

If your data is crucial, you should replace your hard drive immediately because this is a critical error for hard drives.

CrystalDiskInfo C6 – Uncorrectable Sector Count:

The ‘Caution’ message in CrystalDiskInfo will appear in the C6 – Uncorrectable Sector Count line containing a value greater than 0. Uncorrectable sectors are exactly what they sound like—areas of your disc that the hard drive detects as having defects that cannot be corrected when data is read from or written to them.

In essence, you have defective disc sectors that the system cannot repair by reallocating to space. I would advise replacing your hard disc if they are fixed because this is a critical problem. If this figure does not steadily rise over time, similar to Reallocated and Pending sectors, it might be safe to continue using the disc.

If your data is crucial to you, it is advised that you replace the hard disc and only use it for non-critical data storage moving forward. If you do not already have a recent backup of the data, you should back up any data on the drive immediately.

To Conclude:

Depending on the information at your disposal and your current financial condition about Crystal disk info caution, you alone must decide when to replace your drive. If you haven’t already, you should put together a backup plan. And if you can afford it, swap out the drive. If you need help deciding whether or not to replace your disc, you may attach a screenshot of the results from CrystalDiskInfo to comment, and I’ll take a look.

Frequently Asked Questions

How good is CrystalDiskInfo?

It is excellent at the SMART status and may provide a wealth of information about your hard drive, including temperature. It is undoubtedly effective at predicting potential hard disc failure as well. Additionally, not all manufacturers offer tools like it, and it remains spyware- and adware-free and does not require lengthy trials or high prices.

How many is Current Pending sector Count bad?

It would help if you didn’t have any more pending sectors after a complete format. All “pending” sectors have been examined and deemed good if the Reallocated Sector Count has increased; otherwise, it is still zero.

Is CrystalDiskInfo a virus?

There are no viruses or malware incorporated within it. We frequently advise users to verify the health of their SSDs using CrystalDiskInfo. In essence: Yes, it is secure.

How many hours does a hard drive last?

Power-on-hours estimate how long they will last for hard and solid state drives. Typically, a hard disc has an estimated life of 5 years or 43,800 hours of continuous use. A drive may no longer be deemed “excellent condition” when 43,800 hours have passed.

Similar Posts