Pc shut off and won’t turn back on (Brief Fix Guide)

Your computer abruptly shut off as you were working on a significant assignment on it. You could be wondering now how the Pc shut off and won’t turn back on. If a PC shuts off and won’t switch back on, have you ever encountered or heard of such a thing?

Your laptop’s unexpected shutdown and inability to restart indicate a problem with its smooth operation. It could be caused by anything, including virus invasion, hardware failure, and power problems.

The post includes five key suggestions for resolving the problem with your computer abruptly going off. A useful method for recovering unsaved data due to this technical issue is also included. Remove all of the computer’s cords. The power button must be pressed and kept for at least 30 seconds. Connect the wires after releasing the key. Start your computer and see whether the problem still exists.

Fix Pc shut off and won’t turn back on:

Your system is experiencing trouble if your laptop unexpectedly shuts down and won’t come back on. Consider checking your laptop or computer to see if the issue is coming from there. Numerous things could be to blame, as was already mentioned. The five suggestions in the list below can help you resolve the problem.

Method 1: Check the Power Cord

Sometimes the solution is simpler than we anticipate. A bad power cord can be to blame for your computer’s unexpected shutdown and inability to restart. Open circuits can be checked for with a multimeter. The multimeter should beep if there is a strong enough electrical connection; otherwise, the power cords are likely broken. It would be preferable to replace the power cords in that situation.

Method 2: Disconnect from the docking station

Frequently, when you dock your laptop to any appropriate docking station, it causes some technical issue that causes your laptop to shut down abruptly. If you have docked any hardware plug-ins to your laptop’s E-port, you might wish to take them out to see if your laptop turns on without them.

Method 3: Remove and reconnect the battery

If you’ve had the same battery in your laptop for a while, it won’t be long before the battery starts to have problems. If your laptop doesn’t switch on after being abruptly shut down, you may wish to remove the battery, clean it if necessary, and then reconnect the battery. Taking the battery out and putting it back in again can fix the problem if it was accidentally out of alignment with the port while connected to the laptop.

 Method 4: Drain the computer of electricity

Power draining is one of the most efficient ways to switch on a computer or laptop. You use this procedure to remove all of the static electricity (also known as “flea power”) present in your electronic equipment. To learn how to drain the PC or laptop of electricity completely, follow the steps listed below.

• Unplug all of the laptop’s wires since it won’t power on.
• Remove the laptop battery now.
• Tap the power key and hold it there for 20 seconds. To drain the flea’s power, let go of the button.
• Reattach all of the laptop’s cords and power them on.
• The same procedure works on a PC as well.
• Poor hardware

Your computer may abruptly shut down due to faulty or corrupt hardware components. Device Manager can help you locate the error’s cause and solve device problems in safe mode.

Method 6: Keep Your Computer In A Cool Place

Be aware that your computer may be randomly shutting down due to overheating. As a result, I would suggest that you turn off your computer first and leave it off for roughly an hour. Make sure your PC is located in an area with adequate airflow. You should know that finding a great location to store your computer will help it cool down more quickly. Try restarting the device after that. Make sure the fans operate correctly when the system is turned back on.

Be aware that if overheating is the issue, this should resolve it. But this is only a short-term fix. You must first and foremost monitor the heat levels. You should be aware that you may check the temperature inside your PC by installing software that alerts you to heat levels. Remove any programs, like games, that tend to raise the internal temperatures significantly. You’ll be able to use a steady PC as a result.

Method 7: Motherboard Issues

Be aware that a motherboard issue can occasionally cause your computer to shut down. However, identifying motherboard issues is difficult. As a result, we suggest that you visit a computer repair shop to have your computer fixed.

These straightforward suggestions will enable you to identify and resolve computer-related problems. However, I would encourage you to take your PC to a computer repair shop or specialist if nothing resolves the issue and it continues. There, you will learn the precise cause of your computer problems.

Method 8: Boot Into Safe Mode

The Blue Screen of Death may appear during startup due to a complex application, a problematic driver, or some other hardware oddity. If you can, try to find out what’s wrong by searching for the stop code that shows.

However, you’ll likely need to start in Safe Mode to resolve the issue. When using Windows 7, all you needed to do was hit F8 when the computer booted up. Windows 10 makes it much more difficult, but in most cases, if you hit the reset button three times during the boot process, for example, it will lead you to the Automatic Repair page, where you may select Advanced Options.

Alternately, you can use a different PC to create a Windows installation drive(Which opens in a new window) and boot directly from that, selecting Repair Your Computer when prompted.

Either of these approaches ought to eventually bring you to the Choose an Options page, from which you can reboot the machine by selecting Troubleshoot > Advanced Options >Startup Preferences. (If the Startup Settings option is hidden, you may need to select See More Recovery Options at the bottom.)

The choice to boot into Safe Mode, Safe Mode with Networking, or Safe Mode with Command Prompt should then be presented to you by your computer. You can try any of these, while Safe Mode with the fewest restrictions is usually your best bet unless you require an internet connection (in which case, choose Safe Mode with Networking). Windows will start up with only the most important drivers and services active.

Try removing its drivers from Safe Mode if you recently installed any new hardware. If you believe a new program might be at fault, get rid of that. You can use BlueScreenView(Which opens in a new window) to review your most recent Blue Screens of Death to identify the problematic file or any bug check strings and Google error codes.

Final Summary:

Have you ever experienced you were in a rush to submit a project or piece of work before the time when you discovered that the Pc shut off and won’t turn back on Even worse, you might discover that the machine won’t turn back on. If you have experienced something similar, you should know that you are not alone. My computer would shut down and wouldn’t turn back on unless I unplugged it.

But an endless cycle of connecting and unplugging won’t help with this issue. It’s not practical to constantly be on guard, waiting for your computer to crash. Not to mention the possibility that this problem is a sign of something bigger. Therefore, a solution must be found before the issue worsens.

Relevant Question