WD SSD not detected (Causes + Solution)

Let’s begin the topic WD ssd not detected. If your SSD isn’t visible when you’re on the BIOS settings screen, don’t worry. Your Windows computer’s BIOS not detecting SSD issue can be resolved using workarounds. Your SATA driver issue or your BIOS configuration issues are the causes of your SSD not being detected by BIOS. If your BIOS fail to detect your SSD, you can resolve the issue in either scenario.

WD SSD not detected:

You could try a few of the following fixes. Try one of them in the list until everything is working again; you don’t have to try them all.

SSD not showing up because It is Not Initialized:

When you receive a new SSD, it probably is “uninitialized” if it doesn’t appear in Windows Explorer. For Logical Disk Manager to access a disc, it must first be initialized. The same explanation applies if an old SSD displays the “disc unknown not initialized” message.

To resolve the issue in these two scenarios, you can try connecting the SSD to another functional computer and seeing if it displays the same error. Otherwise, Windows 10 will require you to initialize the SSD.

SSD Not Showing Up Because the Drive Letter is missing or conflicting:

Your SSD could not be visible occasionally because the Windows OS cannot recognize it. After all, the SSD’s drive letter is absent or conflicts with another disc. You can resolve this problem by manually assigning the SSD a new drive letter in Windows Disk Management.

Solution 1: Troubleshoot hardware faulty

The BIOS may be unable to recognize your SSD due to hardware issues. Check them out to ensure that your SSD hardware and associated ports are in good functioning order. You can also try a different SSD port to see if the BIOS can recognize it. Doesn’t worry if the hardware functions flawlessly, but you still have issues? Go on to the following resolution.

Solution 2: Configure the SSD settings in BIOS

BIOS may not recognize your SSD because the SATA controller mode is not set properly. As a result, you can modify the BIOS SATA controller settings. Since each brand’s BIOS configuration procedures are unique, we’ll use Lenovo laptops as an example in this section.

• After the first screen, restart your computer and click F2.
• To enter Config, press the Enter key.
• Click Serial ATA, and then hit Enter.
• The SATA Controller Mode Option will appear. IDE Compatibility Mode should be selected.
• To access BIOS, save your modifications and restart your computer.

Your SSD should now be able to be detected by BIOS.

Solution 3: Update available drivers

Your computer’s missing or out-of-date device drivers, particularly those for your motherboard and SSD, can prevent BIOS from detecting your SSD. Consequently, you want to keep your device drivers current. Both manually updating and automatically updating your device drivers are options.

Manual driver update:

• Visit the manufacturer’s website.
• Locate the Driver for your hardware device.
• Download the most recent version.

Installing it manually on your machine follows. Make sure to get the one that works with your Windows operating system. Time and computer expertise are needed for this. Driver Easy can automatically update your drivers if you don’t have the time or patience to do it yourself.

Your system will be instantly recognized by Driver Easy, which will then locate the appropriate drivers. You don’t have to be aware of the specific operating system that your computer is using, take the chance of downloading and installing the incorrect Driver, or stress over making a mistake during installation.

With the FREE or Pro version, you may automatically update your drivers. However, the Pro edition takes only 2 clicks and comes with a 30-day money-back guarantee in addition to comprehensive support:

1. Download and set up Driver Easy first.
2. Click Scan Now on the Driver Easy window. After that, Driver Easy will search your computer for problematic drivers.
3. To have the appropriate version of the device’s Driver downloaded automatically, click the Update button next to the flagged device (you can do this with the FREE version). Install it on your computer after that. When you click Update All, you’ll be given the option to upgrade to the Pro version if you don’t already have it. Alternatively, you may click Update All to have your system automatically download and install the correct version of any driver that is either missing or out of date.
4. To activate, restart your computer.

Enter BIOS and check to see if it recognizes your SSD.

Finally:

That’s it, then. I hope this article solves your problem of WD ssd not getting detected. Please feel free to leave a remark below if you have any queries or recommendations. Any type of storage medium, including SSDs, is vulnerable to physical harm and mechanical breakdown.

To protect the data on these storage discs, you need to have a plan in place in advance. Always have a backup plan in place. It’s never too late to take a step to move a copy of your hard drive data to a backup drive, cloud, network drive, or another secure location. EaseUS Todo Backup Free can assist you in backing up your entire hard disc.

Frequently Asked Questions