Why can’t I get into bios? (Solved)

Continue reading to learn why can’t I get into bios: if your computer won’t cooperate and won’t boot to the BIOS or operating system. You won’t be capable of booting into BIOS if the motherboard or CPU’s power connector is improperly connected or defective. Please make sure the 24-pin connector on the motherboard is firmly inserted and that the cable itself shows no evidence of damage. The CPU typically has an eight-pin connector in a 4+4 shape.

When you first build your computer, when you want to make changes to specific settings, or when you need to fix a problem, you may need to boot to the BIOS. It is annoying when your computer prevents you from accessing the BIOS or, worse yet, the operating system.

Why can’t I get into bios? Follow These Steps:

Remove The BIOS Battery To Reset The CMOS:

It would help if you uninstalled the CMOS battery to clear it since CMOS battery problems may result in boot troubles.

What you ought to do is:

• Disconnect and turn off any external devices plugged into your PC through a USB, HDMI, or other port.
• Open the computer’s case and unplug the power cord.
• Check the motherboard for a flat, coin-like battery that resembles a watch battery. The handbook for your motherboard can help you locate it if you can’t.
• At this point, carefully remove the battery from its position. It can have a clip or lever holding it in place. The barrier can be removed manually or with a screwdriver, and the battery can be removed.
• After the battery has sat outside for about 20 minutes, replace it. Ensure that it is placed correctly.
• Close the case, reconnect everything, and turn on the PC. Be aware that the CMOS battery has a lifespan of around ten years. It is safe to presume that the battery may be dead if you have owned the motherboard for that long or are using a used motherboard. Get a new CMOS battery and swap it out to fix the problem.

Troubleshoot The RAM Sticks:

Your machine may be unable to boot into the BIOS or OS due to a RAM problem. Ensure each RAM stick is in good condition and properly positioned. Turn off the computer by unplugging the power cord. Find the RAM sticks on the motherboard by opening the case. Remove them all from their places, then place them back in one at a time.

You should align the RAM module’s notch with the slot’s notch before installing each RAM module. The tabs on both sides should click when the stick is properly seated. Avoid forcing the stick backward. Try starting your computer again.

If it still doesn’t work, unplug all the RAM sticks and replug just one. If the system is now booting, add each other RAM stick one at a time until you identify the problematic one that has to be replaced. Keep in mind that a motherboard slot could occasionally be damaged, in which case you’ll need to test another slot to see whether it works.

Use UEFI Firmware Settings:

The best way to access the BIOS on a computer running Windows 10 is through the UEFI firmware settings, provided that your computer boots the OS without issue.

• Select the Update and Security option in the Settings app.
• Select the Recovery tab from the left pane, and then click the Restart Now button in the Advanced Startup section.
• Select the Troubleshoot button in the new window with the heading “Choose an option.”
• Next, choose UEFI Firmware Settings under Advanced Options.
• Press the Restart button to force the machine to enter BIOS.

To summarize:

You should refer to your computer’s manual or the manufacturer’s official website to learn why can’t I get into bios because your computer’s specifications can be particular. You must consult the motherboard’s handbook if you built the computer yourself. If the previously indicated procedure did not allow you to access the BIOS, go to the following section to find a solution.

FAQs: